|
Abit KG7-RAID is WEEEAAAAK!?
|
|
By bigbludude
|
September 27, 2001, 06:17 AM
|
Hey kids. I was just about to order my new KG7-R when I noticed that it will not support the processor I want to get (1.4GHz)... Is the description below accurate? I'd think that a board designed to support future chips would take something faster than 1.33... * Support AMD Athlon/Duron 700MHz ~ 1.33GHz or future Socket A Processors based on 200/266 MHz(100MHz/133MHz Double Data Rate)
|
|
|
By ynd69
|
September 27, 2001, 06:31 AM
|
You have to update the bios first...the KG7-R is going to support Athlon XP as well.
|
|
|
By scott
|
September 27, 2001, 06:34 AM
|
It will work just fine, the 1.33 was the fastest TB out at the time they wrote that, more than likely.
|
|
|
By scott
|
September 27, 2001, 06:45 AM
|
quote:Originally posted by ynd69: You have to update the bios first...the KG7-R is going to support Athlon XP as well. Huh? 10.5x133=1.4 Should have those options already with that board. Especially with the SoftMenu, even a 1.4/200 would work just fine. Plenty of fsb/mult settings to get you to 1.4
|
|
|
By ynd69
|
September 27, 2001, 07:01 AM
|
quote:Originally posted by scott: Huh? 10.5x133=1.4 Should have those options already with that board. Especially with the SoftMenu, even a 1.4/200 would work just fine. Plenty of fsb/mult settings to get you to 1.4 Ah yah got me! I think it is time for me to go to sleep, good night.
|
|
|
By mtpockets
|
September 27, 2001, 07:26 AM
|
I dont see anything listed on abits bios section stating that 1.4 support has been added.in my searchings on the kt7a-raid it states the 1.4 can only be used with processors with L 1 BRIDGES DISCONNECTED. obviously a voltage difference yes? I would buy the 1.33 to be shure,or ask a reseller to send you a 1.4 cpu with the bridges disconnected,or wait for the new board.
|
|
|
By slavik
|
September 27, 2001, 08:07 AM
|
that's probably, because if you use a 200mhz tbird it's multiplier has to be 14, and some mobos may not support that mult. so if the proc is locked, the mobo can't change it. quote:Originally posted by mtpockets: I dont see anything listed on abits bios section stating that 1.4 support has been added.in my searchings on the kt7a-raid it states the 1.4 can only be used with processors with L 1 BRIDGES DISCONNECTED. obviously a voltage difference yes? I would buy the 1.33 to be shure,or ask a reseller to send you a 1.4 cpu with the bridges disconnected,or wait for the new board.
|
|
|
By scott
|
September 27, 2001, 08:17 AM
|
quote:Originally posted by mtpockets: I dont see anything listed on abits bios section stating that 1.4 support has been added.in my searchings on the kt7a-raid [b]it states the 1.4 can only be used with processors with L 1 BRIDGES DISCONNECTED. obviously a voltage difference yes? I would buy the 1.33 to be shure,or ask a reseller to send you a 1.4 cpu with the bridges disconnected,or wait for the new board.[/B] WTH are you talking about. Can you link it cause your post makes no sense. Bridges disconnected The voltage is the same, same core. Like I said, it will support 1.4's. With the palominos a bios flash may be needed but with the current crop of processors the KG-7 will work at 1.4(10.5x133) or maybe higher if your oc'ing
|
|
|
By scott
|
September 27, 2001, 08:23 AM
|
quote:Originally posted by slavik: that's probably, because if you use a 200mhz tbird it's multiplier has to be 14, and some mobos may not support that mult. so if the proc is locked, the mobo can't change it. I give up. You don't buy a 1.4, which by the way come unlocked, to run at 14x100 on that board. You just don't, sorry.
|
|
|
By scott
|
September 27, 2001, 08:32 AM
|
quote:Originally posted by mtpockets: I dont see anything listed on abits bios section stating that 1.4 support has been added.in my searchings on the kt7a-raid it states the 1.4 can only be used with processors with L 1 BRIDGES DISCONNECTED. obviously a voltage difference yes? I would buy the 1.33 to be shure,or ask a reseller to send you a 1.4 cpu with the bridges disconnected,or wait for the new board.Now i see where your mistaken, were talking about the KG-7, not KT7A
|
|
|
By myzhi
|
September 27, 2001, 10:28 AM
|
I just install a KG7-raid and 1.4 GHZ cpu just fine. At the first the motherboard detect it as a 1050 cpu, but you can just use the user define function to correct that problem. Later on, I updated the motherboard's bois, and it detect the cpu just fine.
|
|
|
By Philgag
|
September 27, 2001, 10:42 AM
|
KG7 does support 1.4 and more
|
|
|
By s1203372
|
September 27, 2001, 11:37 AM
|
It only shows 1.33 because that was the fastest CPU out when they shipped the board. That means they couldn't test w/ a 1.4, so they didn't claim it. The facilities are there for 1.4+.
|
|
|
By mtpockets
|
September 27, 2001, 06:56 PM
|
sorry my bad,shesh its been a long day,kt7 not kg7 shesh !
|
|
|